BSTLQ - RAYLUBE DOT 3 BRAKE FLUID
- MSDS: BSTLQ
- Manufacturer: MOUREN LAURENS OIL CO INC
- Product Name: RAYLUBE DOT 3 BRAKE FLUID
- National Stock Number: 9150-00N047722
Product Identification
Product ID:RAYLUBE DOT 3 BRAKE FLUID
MSDS Date:03/14/1988
FSC:9150
NIIN:00N047722
MSDS Number: BSTLQ
Responsible Party
COMPTON, CA 90220
US
Emergency Phone: 213-324-4944; 213-664-2121
Info Phone: 213-321-4855
Cage: MRNLR
Contractor
Telephone: 213-324-4944; 213-664-2121
Cage: MRNLR
Ingredients
GLYCOL ETHERS
OSHA PEL N/K
ACGIH TLV: N/K
DFCLTIES DEVELOP, ARTF RESP/OXYGEN SHOULD BE
RTECS: 9999999ZZ
ASPIR HAZ. DO NOT INDUCE VOMIT/GIVE ANYTHING BY MOUTH
RTECS: 9999999ZZ
NOT LEAVE VICTIM UNATTENDED. IF VOMIT OCCURS/IF
RTECS: 9999999ZZ
IMMEDIATE MEDICAL ATTENTION.
RTECS: 9999999ZZ
GUARD NATIONAL RESPONSE CENTER (800-424-8802).
RTECS: 9999999ZZ
EXHAUST SYSTEMS MAY BE REQUIRED.
RTECS: 9999999ZZ
ARE SPECIFIC FOR OIL-BASED MATERIALS ARE
RTECS: 9999999ZZ
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE CONTACT:THIS MATERIAL MAY CAUSE
IRRITATION. DIRECT CONTACT MAY CAUSE BURNING, TEARING & REDNESS.
SKIN CONTACT:THIS MATERIAL MAY CAUSE IRRITATION. PROLONGED OR
REPEATED CONTACT MAY CAUSE REDNESS, B URNING & DERMATITIS.
INHAL:EXPOSURE TO MISTS, OR PROLONGED OR REPEATED EXPOSURE TO FUMES
OR VAPORS THAT(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:MAY BE GENERATED WHEN THIS MATERIAL IS
HEATED, MAY CAUSE IRRITATION OF NOSE & THROAT. INGEST:INGESTION OF
THIS MATERIAL MAY CAUSE IRRITATION OF DIGESTIVE TRACT. THIS
MATERIAL IS AN ASPIRATION HAZARD; PRODUCT CAN ENTER LUNGS
DURINGSWALLOWING OR VOMITING & CAUSE LUNG INFLAMMATION & DAMAGE.
Medical Cond Aggravated by Exposure:NONE KNOWN
First Aid
First Aid:HAVE MD CALL LOS ANGELES POIS CTL CTR (24 HRS) 213-664-2121.
EYE:FLUSH AFFECTED EYE(S) W/CLEAN WATER FOR AT LST 15 MINS. IF
IRRIT/REDNESS DEVELOPS, SEEK MED ATTN. SKIN:DO NOT USE GASOLINES,
THINNERS/S OLVS TO REMOVE PROD. WIPE MATL FROM SKIN & REMOVE CONTAM
CLTHG. CLEAN AFFECTED AREA(S) THORO BY WASHING W/SOAP & WATER & IF
NEC, WATERLESS SKIN CLEANER. IF IRRIT/REDNESS DEVELOPS & PERSISTS,
(SUPDAT)
Fire Fighting
Extinguishing Media:EXTINGUISH W/DRY CHEMICALS, CO*2, WATER SPRAY,
FOAM, SAND OR EARTH. WATER & FOAM MAY CAUSE FROTHING.
Fire Fighting Procedures:USE NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP.
WATER SPRAY MAY BE USEFUL IN MINIMIZING VAPS & COOLING CNTNRS EXPOS
TO HEAT & FLAME. AVOID SPREADING(SUPDAT)
Unusual Fire/Explosion Hazard:THIS MATERIAL WILL NOT IGNITE OR BURN.
Accidental Release
Spill Release Procedures:COLLECT LEAKING LIQ IN SEALABLE CNTNRS. ABSORB
SPILLED LIQ IN SAND/INERT ABSORB. CONT FIRE AUTHS & APPROP
STATE/LOC AGENCIES. IF SPILL OF ANY AMT IS MADE INTO/UPON U.S.
NAVIGABLE WATERS, CONTIGUOUS ZO NE/ADJOINING SHORELINES, NOTIFY
COAST (ING 6)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE IN A COOL, DRY LOCATION. KEEP
AWAY FROM INCOMPATIBLE MATERIALS. AVOID GENERATING OIL MISTS WHILE
HANDLING.
Other Precautions:AVOID PROLONGED OR REPEATED SKIN CONTACT.
Exposure Controls
Respiratory Protection:IF AIRBORNE CONCENTRATIONS EXCEED RECOMMENDED
EXPOSURE LIMITS, A SUITABLE NIOSH/MSHA APPROVED FILTER-TYPE
RESPIRATOR SHOULD BE WORN.
Ventilation:IF CURRENT VENT PRACTICES ARE NOT ADEQ IN MAINTAINING
AIRBORNE CONCS BELOW ESTABLISHED EXPOS LIMS, ADDTNL VENT/ (ING 7)
Protective Gloves:IMPERMEABLE GLOVES.
Eye Protection:ANSI APPROVED CHEM WORK GOGGLES .
Other Protective Equipment:IT IS SUGGESTED THAT SOURCE OF CLEAN WATER
BE AVAIL IN WORK AREA FOR FLUSHING EYES & SKIN. BARRIER CREAMS THAT
(ING 8)
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING. DO NOT WEAR
OIL-SOAKED CLOTHING OR SHOES.
Supplemental Safety and Health
FIRE FIGHT PROC:BURNING LIQ W/WATER USED FOR COOLING PURPOSES. MOVE
UNDAMAGED CNTNRS FROM FIRE AREA IF YOU CAN DO SO W/OUT RISK. FIRST
AID PROC:SEEK MED ATTN. INHAL:IF IRRIT OF NOSE/THROAT DEVELOPS, M
OVE AWAY FROM SOURCE OF EXPOS & INTO FRESH AIR. IF IRRIT PERSISTS,
SEEK MED ATTN. IF VICTIM IS NOT BRTHG/IF BRTHG(ING 2)
Chemical Properties
HCC:V6
Boiling Pt:B.P. Text:>284F,>140C
Vapor Density:HVR/AIR
Spec Gravity:1.038-1.048
Evaporation Rate & Reference:0.01 (BUTYL ACETATE=1)
Solubility in Water:100%
Appearance and Odor:CLEAR; MILD ODOR.
Percent Volatiles by Volume:NEGLIG
Stability
Stability Indicator/Materials to Avoid:YES
AVOID CONTACT W/STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:EXTENDED EXPOSURE TO HIGH TEMPERATURES MAY
CAUSE DECOMPOSITION.
Hazardous Decomposition Products:THERMAL DECOMPOSITION IN THE PRESENCE
OF AIR MAY YIELD MAJOR AMOUNTS OF OXIDES OF CARBON.
Disposal
Waste Disposal Methods:DISPOSE OF PRODUCT I/A/W LOCAL, COUNTY, STATE &
FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.